Stay Safe During DIY Roof Repair

Work Area

Make sure that your work area is clean and organized. It’s easier than you think to slip and fall because of a misplaced hammer or measuring tape. You’ll want to block your work area off from children and pets and identify possible danger zones before you get to work. This means locating unsafe access areas, dangerous power lines, and more. Also consider the temperature. You should never work in extreme elements. Very hot weather can lead to heat exhaustion and dehydration, while icy weather can lead to slick roof surfaces.

Falls

Preventing falls is obviously the main concern when performing roof repair. On average, six roofers die in the US every month from falls. There are ways to stay safe, however. First of all, never work on a wet roof, and keep your workspace as free of debris and tools as you possibly can. Make sure to wear safe footwear. Soft-soled boots provide great traction and are probably your best option. You’ll also want to protect yourself with a safety harness, net, guardrails, and other safety equipment. It might seem like a hassle, but it may save your life. Lastly, always make sure


Siding Efficiency

This discovery should come as no surprise, as media outlets and activists all over have turned going green into a worldwide movement, making environmentalism a consistent aspect of our global political discourse. At the same time, homeowners are increasingly trying to figure out ways to keep their bills low in this recovering, but still shaky, economy. If you’ve tried all the tricks, and your monthly energy bill is still too high, there may be one big roadblock in your way: your siding is working against you.

The rise of suburban communities in the 20th century saw houses being constructed for more cost-efficiency. Building companies began experimenting with other materials like vinyl and aluminum. Although both offered the same amount of insulation, the vinyl technology was not yet fully developed. The vinyl aged quickly, slumping off of houses and often requiring replacement within years of installation. Aluminum, however, gained massive popularity for being cost efficient and low maintenance, eventually becoming one of the most common materials used in the ever-growing suburban America. Although many other options exist today, there are still millions of Americans and people all over the world who have aluminum siding on their home. It


About Makrana Marble

Derivation of Makrana marble

It is an entirely Indian marble. A small place named Makrana is the city of origin of this limestone. It is a small place but marble popularity made it a prominent place, and it delivers marble worldwide.

Within India, Makrana marble has proved its significance many times. It is done that by creating the world class and famous buildings in India. A few of them are Taj Mahal a monument that comes into one of the wonders of the world, Birla Mandir that is a beautiful temple made by using white marble from Makrana, Jain temple of Dilwara, Victoria Temple of Kolkata, etc. are a few more renowned names.

There are lots of mines situated in the Aravalli range, and other nearby areas. These are useful to extract marbles from them, and Makrana marble is one of the prominent ones. It has given employment to lots of people in nearby villages.

Top-notch uses

If you want to take advantage of the world-class marble, then you can employ the same at your house with the help of most excellent architects available. They can help you and design it in a


Making a Wooden Gazebo

First off, you need to get a gazebo plan from an authentic and experienced provider to design your gazebo. Numerous websites offer such gazebo plans on the internet free of cost. Pick one plan according to your preference and the available space in your garden. Make sure you take the accurate measurements for all the wood pieces before starting the construction.

Buy pre-cut wood from your local hardware shop or cut the wood yourself. Many hardware shops will cut wooden pieces in case they do not have the pieces that fit the measurement you need. The measurement will entirely depend on the gazebo blueprint you have chosen for construction.

Once you have decided the place where you will be making your wooden gazebo, you can start measuring the area where the foundation of your gazebo will rest. Dig approximate 30-inch deep holes using a posthole auger where each of the posts will go. The number of posts will be equivalent to the number of sides. Generally, they are six or eight in number.

Place the wooden posts in the holes and use concrete to set them. Use a spirit level to make the posts even


Protect Home From Rain Water

  • Sturdy roofing: If you install worn out or missing roofing materials for your home, the water will easily seep in and damage your house structure. Therefore, always consult with professionals for any roofing related services. Also, you should inspect your roofing twice every year, but if there is any severe storm you should always check your roofing. Look for molds or any water marks underneath your roof.
  • Exterior Paints: Run a quick check on your exterior paintings because heavy rainfalls are very dangerous for. If you find bubbling, cracking or peeling in your exterior paints, repaint the affected area with quality paint that has the tendency to resist water.
  • Foundation: Again, run a quick check the foundation. Repair all the cracks to avoid water from leaking into your home. First concentrate in the large cracks. They need immediate attention and repairing.
  • Basement: Now the next thing you need to inspect is the basement. If there is a water leakage, you will find signs of water seepage. Check your carpets for any wet spots. Don’t forget the corners. You can also sniff your walls for molds and mildews behind your walls. Take appropriate steps to remove all these unwanted things

Build a Man Cave Bar

Materials and Tools for a DIY Man Cave Bar

  • 4×4 wooden posts
  • (12) 2×4 wooden boards
  • Fiberboard
  • Framing Square
  • Circular saw
  • Nails
  • Wood glue
  • Hammer
  • Drill
  • Paint
  • Tape measure

Directions for a DIY Man Cave Bar

  1. Side Frame Construction: The two side panels of the bar will be constructed from two short and two long boards. Using a circular saw, cut four of the 2×4 wooden boards to a length of 42 inches. The, cut four more 2×4 wooden boards to a length of 15 inches. Place the shorter 15 inch boards inside the larger 42 inch boards to create a rectangular frame. Secure the boards together using nails.
  2. Front Frame Construction: Using a circular saw, cut two more of the 2×4 wooden boards to a length of 42 inches and another two 2×4 wooden boards to a length of 84 inches. Again, place the shorter 42 inch boards inside the larger 84 inch boards and secure them with nails to create rectangular frames.
  3. Cut and Prepare Side and Front Panels: Begin by measuring the dimensions of each side panel. Using a table saw cut a piece of fiberboard to cover each of the side panels. Then, measure and cut an additional piece of fiberboard to

Maintenance for Asphalt Pavement

Asphalt Maintenance

Although pavement maintenance agendas will differ from property to property, the overall purpose of asphalt maintenance is to sustain its appeal and extend its life. Some paving maintenance tasks can be managed on your own or by an appointed staff, such as inspections and trash clearance; while others are best left in the hands of trained and equipped professionals. An ideal pavement maintenance should include basic tasks like regular assessments, sweeping, crack filling, pothole repair, periodic line striping, and most importantly, seal coating. Without a proper sealcoat, asphalt pavements will experience heightened wear and tear from traffic, weather, chemicals, salts, and more, which shortens their life and diminishes their aesthetic value.

Asphalt Seal Coating

Seal coats are emulsions that are brushed or sprayed onto pavements, providing a clear protective layer against moisture and the above-mentioned threats. There are several types of commercial sealcoats available on the market, but the most popular versions include fog seal, slurry seal, and chip seal emulsions. Some sealcoat products are water-based, which are easier and safer to spread. But there are also waterless versions that use organic or plant-based oils or hydrocarbon solvents instead.

Choosing to Seal


Sufficient Sub Floor Ventilation

Due to the various activities that take place in the home, moisture is bound to build up in the air. When this air cools down, condensation takes place and water droplets form on cold surfaces such as the walls and windows. The accumulation of water droplets in the home causes it to become damp. The damp surfaces become a breeding ground for mould and if the home has structural supports made from timber, they can rot and get damaged. The supports will then have to be replaced which can be costly.

When there is an accumulation of moisture on your under floor, this moisture can get absorbed by the floor of your home. If this floor is made from timber, it will end up expanding due to the moisture. This will cause the timber to lift up and your floor will become uneven. Termites are also attracted to moist areas and can cause serious damage to the timber on your sub floor.

Mould spreads very fast in moist surfaces and can cause breathing problems, chest pains and you can even end up developing asthma. Dust mites are also attracted to damp areas and you can develop


Tips to Beat Summer Heat

  • Use fans. Even if your home is air conditioned turning on fans for ceiling fans will make your home feel cooler as the air circulates.
  • Keep plastic water bottles in the freezer. Then, just grab and go. As they thaw, you’ll have a cold, refreshing drink.
  • Hydrate, hydrate hydrate. Speaking of water, you can’t drink too much of it. Avoid caffeine and alcohol as they promote dehydration. Stick to water or sports drinks or other sources of electrolytes.
  • Put your lotions in the frig. That’s right – think about storing lotions and cosmetic toners in the refrigerator. They’re perfect for hot, tired feet
  • Change you eating habits. Instead of hot foods, try lighter summer fare and have small meals or snacks more frequently. Cool fruit should be a summer favorite. You’ll feel lighter and cooler and you don’t have to stand by a hot stove.
  • Cool your head to cool your body. If you’re outside exercising, take off your cap, put a little cold water in it and quickly invert it back on your head. Refreshing!
  • Be especially careful to guard babies and the elderly from overheating. They will dehydrate easily and are more susceptible to heat-related illness. Make sure they’re cool and comfortable.
  • Get your house ready for the


Benefits of Cowhide Rugs

Many allergy sufferers are irritated by various carpets and fabrics indoors, especially because the carpet can trap allergens in its fibers, including mold, dust, and dander, and these items can find their way into the air whenever you walk on the carpet. Unlike most traditional carpets, however, cowhide rugs do not trap allergens and do not release fibers into the air. While they do gather dust, these rugs do not trap dust within their fibers like other rugs do. Instead of regular cleaning and vacuuming, all you need to do is take the rug outside and shake it to rid it of dust, and brush it by hand every so often to remove visible dirt. This of course cuts down on the overall time you need to spend cleaning any room in which you place your cow skin rug, which can save homeowners and apartment dwellers money in the long run, because there is no need to have the carpet professionally cleaned periodically. Rugs made from cowhide do not contain synthetic materials and are also unlikely to be treated with volatile organic compounds (VOC’s), such as pesticides and flame retardant chemicals.

These rugs are also very simple