It will help make the spaces between the walls and the ceilings have an even look. Moreover, molding is utilized to finish fireplaces, cabinets, and built-ins.

Installing crown molding is not a new concept. Molding was previously used by homeowners to reflect the room type and its intended purpose.

For instance, reception areas were often furnished with ornate and elaborate moldings while kitchens and other less decorative rooms in the house have plain crown molding.

Generally, it is quite easy to set up. However, you may require the help of a handyman if you intend to install large and complex moldings. Here is a quick guide on how you can install painlessly:

  • Planning
    Most people usually neglect this step. This is a huge mistake since if you don’t plan properly, you may end up being frustrated and may make a mistake while installing it.

There are different types of crown molding. Decide on the specific size and style of molding which you would like to have.

The size should match the ceiling height of your house. Sometimes, you can still opt for large moldings, provided that you properly scale your casings to accommodate them.

After you’ve chosen the specific size and style which you want, you should determine how much you need. Make some allowances for waste cutting.

  • Order All the Required Materials
    In the planning phase, you will get a list of all the materials which you require. Besides the moldings, you should order adhesives, caulk, and fasteners as well. To save yourself the hassle of making many trips to the hardware store, purchase everything you need all at once.
  • Assemble the Materials
    Assemble all the materials which you have bought in a work area. While assembling them, confirm if you have everything which you need. If you notice you forgot to get something needed, you should purchase it immediately.
  • Pre-finishing
    Sometimes, it can be quite essential to pre-finish your crown moldings. Pre-finishing is an excellent idea, especially in instances where you intend to utilize brightly colored paints in your installation process.
  • Layout
    Draw a distinct solid line around the room where you would install it. The distance between this line to the ceiling will be the height of it.

This line should be straight. Then, draw another line on your ceiling to mark the projection. Use these two lines to mark the ceiling joists and the wall studs.

  • Start Installing
    Start the installation process from the least noticeable corners. Wood moldings are usually lapped at straight joints and cropped at inside corners.

However, this is not the case in polyurethane molding. When installing this molding type, miter cut both the inside and outside corners; and utilize straight butt joints.

You should cut crown molding when it is turned upside down. Dry fit each piece of the molding before applying adhesive to it. You can utilize finish nails to attach the molding.