- One of our New Year’s resolutions for 2016 was to find ways to incorporate more plants in our home. We love the sense of peace and purpose our plants bring to our home and we simply wanted to diversify our jungalow.
- I came across Artisan Wall Mount hanging vases while browsing the Pottery Barn website and really liked the concept (just not the price $69-$119).
- We can never resist the dollar section at Michaels and *somehow* ended up with 4 adorable glass test tubes for $1.50 a piece. If you have tubes around in your home (think spice tubes) that you aren’t using, this could be the perfect way to upcycle them)
A few visits to the garage later and we had the perfect design for a hanging vase we had pictured in our mind. The finished product involves 4 hanging glass tubes that, while certainly smaller than the Pottery Barn Wall-Mount Vase, are far more economical ($15 compared to $69) and just as dazzling visually. If you’re looking for a budget-friendly way to incorporate more foliage without cramping your space with pots, this is the perfect solution for you!
- Glass Tubes
- Scrap Wood
- Copper Tube Straps
- Hanging Kit or Command Hanging Solution
Note: We did not list the dimensions of the tubes or the tube straps because that will depend entirely on what you find and decide to use. If you have your tubes just take them to Home Depot and you will be able to find the straps that fit them very easily. Also, you are not limited to scrap wood for the base; we just wanted to use what we have. If you’re looking for something less rustic, Michaels has a lot of nice wood pieces that could work. All in all, if you play your cards right, this DIY is very inexpensive and so easy to put together.
- Once you have all your pieces, all you will need to do is drill two holes (corresponding to the holes in the tube straps) into your base. Make sure that your base is thick enough to withstand the length of the screws.
- If you are choosing to hang these on your wall the old fashion way, go ahead and nail your hanger to the back of the base.
- Once complete, drill the tube straps halfway into the base so that the straps are loose enough to adjust.
- Slip your tube through the tube strap until it is positioned the way you like (we aligned our tubes so that the tube strap was the halfway mark). Once you are happy with the positioning of the tube, tighten the screws until the tube is secure (do this gently so as to not crack the tube).
- Mount your completed vase to the wall and decorate with real or artificial flowers, grasses, or air plants.