Month: August 2019

Wood Effect Tiles

Installation Costs

Laminates lead the way in terms of cost efficiency. Not too challenging for the average DIY person, they usually sit on a foam underlay and click together. Orientated correctly, trimmed neatly at the walls, and finished with a narrow beading if necessary – the job is straightforward.

If tiling, then doing so on a concrete or screed floor is the simplest option, and therefore the cheapest form of tile installation. If the floor needs some preparatory work, such as levelling out, this work will be needed for both ceramic and wooden floors. However, one would expect a tiler to be significantly quicker than a carpenter thereafter. The wooden planks need to be glued down, and to each other, as well as being cut to shape. Laying a natural wood floor is usually more expensive than floor tiles.

When tiling over joists or old floor boards, it is recommended that a backing board is installed first. This is because if tiling over sheets of ply or the floor boards themselves, the initial shrinkage of the sheets plus regular expansion and contraction with fluctuations in heat will cause movement. Floor tiles will be secured to these surfaces, and are not designed to tolerate such movement.

When installing timber over existing floorboards, the installer must ensure that they are solid, and that the new floor lines up perpendicularly to the old floor. If this is not possible, then the installer must sheet the floor out first. Alternatively, batons must be fixed to the floor first, and then sheeted.

Another consideration which must to be taken into account is the climate. Floor tiles can be laid the day they arrive. With timber, there are recommended moisture parameters for both the substrate and the new planks themselves, which must be adhered to. It is highly recommended that new wood be stored in the room in which it is to be installed for one week prior to fitting, so that it can acclimatise to the ambient temperature of its surroundings.

After all preparation work is carried out, the bill at that point is roughly the same for timber or wood effect tiles. However, the final installation cost will be cheaper if floor tiles are chosen.

Wear, Tear, and Maintenance

Natural wood is often finished with a lacquer or oil on the surface. This will wear over time through everyday use. The higher the level of traffic, the quicker this happens. Unfortunately, it only occurs on the part of the floor where walking occurs, which makes the deterioration all the more obvious.

Moving furniture, dragged toys, the toenails of large dogs, high heels etc. will all dent or scrape the surface of wood. It can fade too, more so in the areas that are subject to the most sunlight, something that will not happen with tiles.

Engineered and solid woods can be refinished at this point, but if left too long, they will need to be sanded down first, and that is a large, complex job.

Laminate floors cannot be sanded. Although they can be tougher than their natural counterparts, once they have worn through, that is the end of them, and they will need to be replaced.

Wood effect floor tiles, once fitted, require no maintenance other than a quick mop. Unless there has been a catastrophic spillage of something significant, such as tar or oil, even grout is not likely to tarnish. And even if it does, there are many cheap, easy to apply, restorative cleaners available on the market, which will bring grout up as good as new.

Water Damage

With wood, a lot of damage can be caused by a small flood from a domestic appliance, or even incorrect mopping and cleaning. As a natural product, moisture can be absorbed from the atmosphere or from standing water. This will cause planks to expand and buckle under the ensuing pressure, or warp out of shape. Splitting, discolouration, and rot can result.

To clean a wooden floor, it is not recommended to dump a bucket of water out into the centre, and then spread it around to get the job done. The water will seep between the joints, and the timbers can sustain irreparable damage.

Some laminates are mounted on water-resistant boards, which are ideal for bathroom or shower areas instead of natural wood.

All wall and floor tiles, by comparison, are manufactured to handle water.


Basics of Stucco Finishes

Stucco can also be used as a coating on buildings as well. It is a good adhesive for a building. Stucco is used as a more decorative material. Not just anyone can install stucco, it is that good.

Stucco can have additives in it such as acrylic and glass fibers so it is very important that you have the proper training and certifications to complete a job that requires stucco finishes. Upon hiring a contractor for stucco finishes you would want to make sure that they are fully capable of doing exactly what it is that you want done.

If it is something simple you would want to ensure that your contractor knows the basics of stucco finishes so that your stucco installation job looks amazing versus poorly done which is a huge eye sore if it is not done correctly. In order to know the basics of stucco installation one would need to attend some type of training and get certified.

When choosing a contractor to do your stucco finishes it is important to ask questions, you never just hire someone on a whim, you want to ensure better finishing for appealing looks.

One may look at a stucco installation and think that it is something that can easily be duplicated; truth is it is far from easily being duplicated. As stated before stucco installation is a skilled trade same as a plumber, or electrician, or even a builder. Skilled trades aren’t easy to master; it takes time and plenty of training to master completely.

So again, it is important to make sure that your contractor has at least the basics of stucco mastered. It is perfectly acceptable to ask any contractor for their portfolio so that you may see work they have before done.

Any contractor who has an issue with showing you their portfolio that has pictures of earlier work completed is a contractor you will most likely not want to deal with. In some cases maybe they are just starting out in the field, and as we all know you do have to start somewhere.

If the situation is one such as that, one must remember that even doing training they would have done some type of stucco installation and should at least have that information so that you can at least call whoever certified them to see what type of recommendation they would give you for the said contractor.

Stucco installation isn’t for an amateur and surely isn’t something that are learned over night, it takes training, time and patience as well. Portfolios don’t lie, and any good contractor will have one. Another thing to look for in a contractor when it comes to stucco installation is to ask around.

A lot of times, especially in an area where there are lots of stucco finishes chances are that most of them probably used the same contractor. It never hurts to ask and get others opinions. Opinions and testimonials from earlier customers can go a long way and get you a good stucco installation.


Sub Floor Ventilation

Why Sub Floor Ventilation

A sub floor refers to an extra level of flooring that is positioned right on top of the floor joists, and another level of flooring is then placed over it which is the visible floor. A sub floor is usually added to a building so that the floor remains even and flat and also to increase its stability. When air between the floors absorbs moisture from the soil, the humidity of the air goes up which causes the flooring and the framing of the building to also absorb moisture.

Ventilation is therefore important in order to decrease the humidity of the air that is found between the floors. This can be done by replacing the dump air found between the floors with dry air from outside.

Need For Ventilation

Once you realize that your floor has mould and that there is a stale smell in the rooms of your home, then you may be in need of immediate sub floor ventilation. Dampness of the soil usually increases during wet weather, and the moisture easily gets absorbed into the floor and walls of your home. This dampness causes moulds that attract termites which end up destroying your floor.

Moulds can also discolor the tiles of your floor and the bricks that make up your home. Sub floor ventilation is therefore important to in reducing the maintenance costs of your home and also in retaining its value.

Types Of Ventilation

There are different methods that can be used for sub floor ventilation, and how much ventilation will be required will depend on the amount of humidity in that location. The use of air vents is widely used in ventilating the sub floor. This is where air vents are located on opposite sides of the sub floor and air can therefore get in through one side and out through the other.

There should be nothing blocking the movement of the air in and out of the sub floor. To make this system more effective, sub floor fans can be installed to ensure there is proper movement of air. The fans create negative pressure thus causing air to rush in from the vents.

You can decide to have fans which run throughout or ones which are timed. There are also fans which ran on solar energy which means that they do not run when it is cold. Fans should not run when it is wet since the air that comes in will be damp.


Info of Contemporary Home Accessories

Hollow Cube Tables

Upgrade the style of your living room, bedroom or kids room with light weighted, stylish and colorful hollow cube tables. They add an instant chic to your room which might sounds dull or live less. Let every inch speak the beauty of room by just adding these charming contemporary tables.

Wall Mounted Candle Stands

Candles are undoubtedly the warmest and cozy welcome for décor styling. Let your feelings, touch glow with these musical shaped wall mounted candle stands. Let the melody and warmth get mixed together to create the feel and your personal touch to your bedroom.

Stylish Center Table

Replacement of simple and rectangular center table is at times important to make a major difference. Try out such special center table designs to the let modern touch knock at your style statement. Make an impression with aesthetic as well as useful contemporary center tables.

S Shape Towel Rod

I know towel rods are quite common and many people do not count it under stylish accessories placement. But have you ever thought of a towel rod which can carry 2 or 3 towels at a time without taking any extra space from your bathroom walls. They are stylish, useful and most importantly they uplift the accessories class of your bathroom.

Corner Open Racks

At times unfortunately we under use or miss the corner space of our home. It’s like why to waste the space when it can be utilized atheistically and charmingly. Corner zig zag open racks are perfect solutions to your small but important storage, bit of show off and space utilization.

Floating Wall Racks

Yes they are quite important and essential part our home which can replace few boring closed cabinets. Remember, even walls needs some space to breathe freely. But with the cramp spaces and storage needs we do end up with most of the closed box cabinets. Try out floating wall racks for your living room area, bedroom, kid’s room etc. Let your walls get some vacant space with positive utilization and effective styling.

Floor Corner racks

Not just wall mounted corner racks prove to be good for your home but also floor corner racks are equally useful and uplift the décor part of your home. Let the corner of your living room or bedroom get the equal importance just like wall and other parts of room. Cuddle up your favorite books, belongings in the arms of your floor corner rack.


Block Clearing Tips

  • Find the right equipment – It is very crucial for you to have all the necessary equipment to do the job. And this will include hand tools and earth moving equipment such as bulldozer. Oftentimes, you will actually need a commercial-grade chainsaw along with some proper personal protective equipment.
  • Learn how to use the needed equipment – Even if you have all the necessary equipment but you are not aware of how to use it, it will be useless. For instance, you have to learn how to properly use a chainsaw and how to properly cut down trees. Cutting down a tree is not very easy – you can actually seriously injure yourself or perhaps even damage nearby properties. Indeed, it is very important for you to know how to property use the equipment you have at hand.
  • Have your trees checked by a professional – Prior to cutting trees, it is a wise idea for you to have an expert look at such for you to know if any of these are of great value. Know that there are some firms that will cut down trees for you on top of buying it from you.
  • Determine how you can go about the block clearing process – You have to decide on the best way on how to do the block clearing process. There are actually some professionals who cut down all the trees on a certain property and move such into a separate location for processing. But for some, they just cut down the trees and leave the stump that will be removed by heavy equipment later on.

Splitting and Stacking Firewood

Tools that are needed:

  • Axe
  • Sledgehammer
  • Wheel barrel
  • Tarp
  • Old Tire
  • Splitting Wedge
  • Hard Hat
  • Google’s
  • Gloves

Before you start splitting, you need to put on your Safety Gear of a Hard Hat, Google’s, and your Work Gloves. Now that you are all geared up, you are ready to attack that pile of wood that you have in front of you.

A good suggestion to make your splitting easier and simpler would be to use a small Old Tire.

First find a flat area where you can lay it on the ground, then stand a log upright in the center of it. Now take the axe which hopefully you have sharpened before you decided to get the Firewood split, and bring it down with force in the center of the log. This will make the piece split in half hopefully if you applied enough energy into it. Some of the pieces may be hard to break through, this is where you will need to apply the Splitting Wedge into the cut. Now take the Sledge Hammer and drive the Wedge into the log.

With the tire protecting the log, all the pieces should be contained within it and not all over the ground. Also, it will give you more protection from flying debris that could hurt you or others. If part of the log is still standing up, you can split it again to make smaller pieces. Load your split wood into the wheelbarrow, then wheel it to where it needs to be stacked.

Once the logs are split, you want to bring the wood into a Shed and stack it in neat rows. If you do not have a Shed, you want to create a square post by staking the Wood up to make it look like a post. on both ends of the row. You may have a paved or gravel area where you can stack this Wood, but if you do not have an area available like that, then you should place some planks of Wood underneath the Fire Wood to protect it from rot.

Now start filling in the row where you created the Wood stack posts on either end. Once you have this row completed, you possibly will need to build more rows in order to have all your wood ready for your winter heating or camping.


Unique Duties Of A Roofing Contractor

Budgeting

In addition to planning how the work will be done and who will be responsible for different tasks, the contractor will also be responsible for coming up with the budget of the roofing project.

For him to come up with a fair budget, the professional has to know what is needed. He also has to know the current market prices of different materials. To avoid bombarding the client with surprise costs, the contractor should account for everything before the project commences.

Purchasing of materials

After preparing a comprehensive and well thought budget, the contractor is the one who is responsible for the buying of the roofing materials. To reduce the cost of materials, the roofer should do thorough research and identify the places where he can buy high quality materials at low prices.

The roofer should also be aware of other alternative materials that he can use in case he can’t find what he is looking for. To ensure that the project runs smoothly, the roofer should buy the materials early enough and at the right time. This is to avoid delays that might slow down or even stop the project.

Obtain licenses

To ensure that the project is legal, the contractor should notify the right bodies and obtain the right licenses that are required for the project to proceed without any hiccups. Different countries and states have different legal requirements; therefore, the roofer should be aware of the requirements.

Be updated

In addition to the above duties, it’s also the duty of the roofer to be updated of the current technological developments. For example, the contractor should be aware of the release of any new tools that will make the roofing work easy. To be updated, the roofer has to read wide. He also has to be connected with other roofers.


Organize Dorm Room to Maximum Space

Rise Above it All

To get the most out of your space, you’ll have to use every inch of it. Propping your bed up on bed risers is a great way to give yourself several feet of much-needed space. Use this space to store bins and containers filled with blankets, books, or clothes. There are many styles of storage containers to choose from, and some even come with wheels attached making it easy to access what you need. According to Seventeen.com, look for risers with built-in outlets so you can easily charge your smartphone, tablet, or laptop right from your bed.

Handy Hooks

Hooks come in handy when you need a spot to hang your bags, clothes, and accessories. Driving nails through dorm walls is not only frowned upon, it’s difficult trying to get a nail through the concrete walls. An effective solution is using temporary hooks that adhere securely to the walls. Although temporary, these useful hooks are sturdy enough to hold many items – from bathrobes and coats to backpacks and sets of keys. At the end of the semester, simply remove the hooks.

Stack ‘Em Up

Stackable bins and baskets are a great way to gain vertical space on desks, on top of armoires, or on the floor. Store your most-used items in open bins so you can easily access what you need.

Over-the-door Shoe Organizer

Running out of closet space is one of the biggest dorm room complaints. Hanging an over-the-door shoe organizer on the inside of your closet lets you organize your shoes while freeing up useful space for other items. Shoe organizers are also great for corralling other items besides shoes. They’re great for holding toiletries, pens, highlighters, paper clips, etc.

Tension Rods

Most dorm closets usually come with only one hanging rod – hardly enough space to hang all your clothes. Add an additional rod to maximize your space; they are easy to install – look for ones with hooks that hang over the existing rod. Simple! According to the pros at Ambersorganizing.com, if possible, avoid bringing an entire semester’s worth of clothing with you at the start of the semester. If you plan on visiting home, you can swap clothes as needed to help prevent overcrowding.


Tips For Decorating Bedroom

Go for simplicity

Your bedroom should be simple, comfortable, elegant, and sophisticated no matter what style of decoration you go for. For easy movement, the distance between the sidewalls or the bed should be a minimum of two feet.

Your bedroom should have things that you really need. For instance, some essential items in the bedroom may include a dresser, a few bedside tables, and a chair. Other than these things, you may not want anything in your bedroom.

Pay Attention to the Ceiling

What do you see when you lie down in bed? If you see a blank, bland surface, you need to make it better. For instance, you can add a bit of soft color and pattern. You can opt for a lighter version of the color that you painted on the walls. This will make your ceilings look lower in addition to emit feelings of intimacy and comfort.

Aside from this, you can put wallpaper on the ceiling and add some elements of architecture, such as moldings, beams or some decorative paint.

Pick The Right Furniture

If you want to purchase bedroom furniture, make sure you have a floor plan and enough space. All the articles of furniture should fit in your room, especially if it’s a bedroom. Choosing large, heavy beds or dressers is not a good idea, especially if the room is not big enough.

Have Enough Storage

The things that you don’t need should be hidden somewhere in the room, which will make your room look big and calm.

Cover the Windows

If you have beautiful windows, they will add patter, texture, color and softness to your bedroom. Moreover, if you are into soft curtains that are good at filtering light, you can go ahead and choose opaque roller blinds as they can be pulled down for privacy at night. Moreover, they can also be used to block sunlight in the morning.


Creative With Making Patio Furniture

You will need to decide what type of patio furniture you want. In other words, will it be made of wood or metal? For wood, you won’t need too much skill, as hopefully you would have had some experience with woodwork in school or with your dad when you were young. For metal, you may require a bit of skill as the tools you will need are specialised.

If you opt for a metal framed patio set, then you will need to source the same type of metal. This will help you with the structure and the soldering process. With metal you will have to solder the pieces together so that it can be sturdy. To begin the process you will need to measure the parts and cut them to size. Make sure that you measure twice to avoid any mishaps with the length of the parts. Place all the parts in the order that you will join them. Double check this. Once you are sure of each part’s positioning then begin with soldering it together. Once the parts are together and you have all your patio seats, you can paint it the colour you desire. The metal patio set will prove to be hard and cold to sit on. For this you can simply measure the seating and back areas so that an upholsterer can make the cushions for you.

The wood option is usually more popular because it doesn’t rust and it is a cheaper alternative to the metal. In most cases, people find unused pallets and use it to create their own furniture masterpieces. With pallet wood you don’t have to start from scratch. You could simply take one pallet as it is, add four small legs on each corner, sand it and paint it to create an outdoor coffee table. You may want to add a glass top for a smooth surface. For the seats you will need to take the pallet apart in order to piece the wood together to make it sturdy. You will need a saw, hammer, nails and glue to achieve this. Again, make sure that you measure the length of the wood so that your patio seats are all the same size and are symmetrical. If you are happy with the measurements, then glue and nail the wood pieces together. You can paint the wood or varnish it for a natural appearance. Measure the seating and back area. Send those measurements along with your choice of material to the furniture manufacturer who can make it for you. That part you don’t have to make yourself, because sewing the cushions can be a bit tricky if you haven’t done it before.